[MIP6D-NG Support] Error in running mobile node conf file

[Neha Patel]

Hello,

here is my log of mip6d-ng while running mobile node.


rucha at rucha-HP-630-Notebook-PC:~$ sudo /home/mip6d-ng/bin/mip6d-ng -c
/home/mip6d-ng//bin/mip6d-ng-mn.conf -m /home/mip6d-ng/etc/mip6d-ng/modules
[DBG] 20151126 143943.139 |_api-c0a651b7| Initializing module: api
[DBG] 20151126 143943.139 |_api-c0a651b7| API listening address is
unspecified: using in6addr_any
[DBG] 20151126 143943.139 |_api-40abacb6| IPv6/TCP accept thread started on
[::]:1234
[DBG] 20151126 143943.139 |_env-c0a651b7| Initializing module: environment
[DBG] 20151126 143943.140 |_md_-c0a651b7| Initializing module: MD
[INF] 20151126 143943.140 |_md_-c0a651b7| Interface added: eth0 2
[DBG] 20151126 143943.140 |ccom-c0a651b7| Initializing module: core-comm
[DBG] 20151126 143943.140 |ctrl-c0a651b7| Initializing module: control
[DBG] 20151126 143943.140 |ctrl-c0a651b7| Initializing node: MN
[DBG] 20151126 143943.140 |ctrl-c0a651b7| Home-address:
fe80:0000:0000:0000:ca3a:35ff:feca:79c0
[DBG] 20151126 143943.140 |ctrl-c0a651b7| HA address:
fe80:0000:0000:0000:99a3:c4dc:8ed1:d380
RTNETLINK answers: File exists
[ERR] 20151126 143943.191 |_env-406bacb4| Unable to add state!
       [17] File exists
[ERR] 20151126 143943.191 |ctrl-c0a651b7| Unable to create IP6IP6 XFRM
tunnel
       [0] Success
[DBG] 20151126 143943.192 |_api-406bacb4| New API command registered:
CTRL_GET_HAA [4 1]
[DBG] 20151126 143943.192 |_api-40fb0fb4| New API command registered:
CTRL_GET_HOA [4 0]
[DBG] 20151126 143943.192 |data-c0a651b7| Initializing module: data
[DBG] 20151126 143943.192 |_api-406bacb4| New API command registered:
DATA_GET_BUL [5 0]
[DBG] 20151126 143943.192 |mcoa-c0a651b7| Initializing module: mcoa
[DBG] 20151126 143943.193 |mcoa-c0a651b7| MCoA interface 2: bid 1
preference 254
[DBG] 20151126 143943.212 |_api-406bacb4| New API command registered:
MCOA_GET_BUL [6 0]
[DBG] 20151126 143943.213 |flob-c0a651b7| Initializing module: flowb
[DBG] 20151126 143943.213 |mcoa-406bacb4| Set MCoA 2 interface preference
to 10
[DBG] 20151126 143943.213 |_api-406bacb4| New API command registered:
FLOWB_REGISTER [7 0]
[DBG] 20151126 143943.213 |_api-40fb0fb4| New API command registered:
FLOWB_UPDATE [7 1]
[DBG] 20151126 143943.213 |_api-406bacb4| New API command registered:
FLOWB_DELETE [7 2]
[DBG] 20151126 143943.213 |ctrl-c0a651b7| Start module: Control
[DBG] 20151126 143943.214 |_md_-c0a651b7| Start module: MD simple
[DBG] 20151126 143943.214 |_md_-c0a651b7| Interface eth0 2 is UP

On Thu, Nov 26, 2015 at 2:33 PM, Norbert Varga <varga.norbert89 at gmail.com>
wrote:

> Hi Neha,
>
> please send us the entire mip6d-ng log file.
>
> Br,
> Norbi
>
> 2015-11-26 8:53 GMT+01:00 Neha Patel <14pgce030 at charusat.edu.in>:
>
>> hello,
>>
>> I am doing research in which I really need to implement mobile IP. I have
>> executed Home agent configuration file. which is working properly. But
>> while executing Mobile node configuration file following errors encountered:
>>
>> [ERR] 20151126 131522.299 |_env-40dbabb4| Unable to add state!
>>        [17] File exists
>> [ERR] 20151126 131522.299 |ctrl-c01651b7| Unable to create IP6IP6 XFRM
>> tunnel
>>        [0] Success
>>
>> Config file of Mobile node is as follow
>>
>> loglevel = 2
>> interfaces = { "eth0" }
>> md-delete-delay = 8
>> mn {
>> home-address = "fe80::ca3a:35ff:feca:79c0"
>> ha-address
>> = "fe80::99a3:c4dc:8ed1:d380"
>> lifetime = 40
>> }
>> bid-pri eth0 {
>> # Lower value indicates higher priority
>> priority = 10
>> }
>> api {
>> listening_port = 1234
>> }
>>
>>
>> kindly reply me where i am wrong as soon as possible.
>>
>> Thanks and Regards,
>> Neha
>>
>>
>> _______________________________________________
>> Support mailing list
>> Support at mip6d-ng.net
>> http://mcl.hu/mailman/listinfo/support
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mcl.hu/pipermail/support/attachments/20151126/6f118370/attachment.html>