[MIP6D-NG Support] mip6d-ng make all install errors
Norbert Varga
varga.norbert89 at gmail.com
Sun Dec 8 16:26:12 CET 2013
*sudo make install*
*reboot the OS*
Don't use dpkg command.
I hope it will be useful.
Br,
Norbi
2013/12/8 Norbert Varga <varga.norbert89 at gmail.com>
> Hello Gábor!
>
> I wrote a short HOWTO about the installation of the custom kernel. This is
> works fine for me on Ubuntu 12.04 (64 bit).
>
> 1. Download the kernel source
>
> * wget http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.x.tar.bz2
> <http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.x.tar.bz2>*
>
> 2. Copy the the current config contained in /boot directory
>
> *wget
> http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.2.17.tar.bz2
> <http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.2.17.tar.bz2>*
>
> 3. You can configure the kernel with* make menuconfig*
>
> 4. Patch the kernel
>
> * patch -p1 -d directory -i path_to_the_patch_file*
>
> 5. Compile and install the kernel
>
> sudo make
> sudo make modules_install
>
>
>
> 2013/12/8 Gábor Hegedüs <hgabor1989 at gmail.com>
>
>> Hi!
>>
>> I tried it again. Same error again.
>> I tried it without deb packeges (make,make modules, make headers_install,
>> make install)
>> and i got the same error again:
>> https://dl.dropboxusercontent.com/u/91011488/NG_makeall4.png
>> I copied the missing header file and I got other errors.
>>
>> Here is what I type in the CLI:
>>
>> git clone git://
>> git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
>> cd linux-stable/
>> git tag -l
>> git checkout 3.8.2
>> cd ..
>>
>> patch -p1 -d linux-stable -i
>> /home/mipv6/wakoond-mip6d-ng-e1627981bdcf/patches/kernel/3.8/kernel_xfrm6_raw.patch
>>
>> cp /boot/config-3.5.0-17-generic .config
>> cd liux-stable/
>> yes '' | make oldconfig
>> make menuconfig
>>
>> Networking support / Networking options
>> Transformation sub policy support ==> y/m
>> Networking support / Networking options / The IPv6 protocol
>> IPv6: Mobility ==> y/m
>> IPv6: XFRM raw IPv6 tunnel ==> y/m
>>
>> make clean
>> make -j 5 deb-pkg LOCALVERSION=-mip6dng
>>
>> sudo dpkg -i linux-image-3.8.2-mip6dng_3.8.2-mip6dng-*_i386.deb
>> sudo dpkg -i linux-headers-3.8.2-mip6dng_3.8.2-mip6dng-*_i386.deb
>>
>> What is the problem with that?
>>
>> Thanks,
>> Gábor
>>
>>
>> 2013/12/6 BOKOR Laszlo <goodzi at mcl.hu>
>>
>>>
>>> Hi!
>>>
>>> Where have you performed the kernel setup in this workflow?
>>>
>>> Br,
>>> goodzi
>>>
>>> ps.: please choose reply all in order to always keep the list cc-d.
>>>
>>>
>>> --
>>> László BOKOR
>>> Budapest University of Technology and Economics (BME)
>>> Department of Networked Systems and Services (HIT)
>>> Tel: +36-1-463-2048, Fax: +36-1-463-3263
>>> web: http://www.hit.bme.hu/~bokorl
>>>
>>> On Fri, 6 Dec 2013, Gábor Hegedüs wrote:
>>>
>>> Hello!
>>>> I did not use make install.
>>>> I followed the readme files and 5th and 6th
>>>> steps are:
>>>>
>>>> 5. Compiling kernel
>>>> -------------------
>>>> cd linux-stable
>>>> make clean
>>>> make -j `getconf _NPROCESSORS_ONLN` deb-pkg LOCALVERSION=-mip6dng
>>>>
>>>> 6. Installing the kernel
>>>> ------------------------
>>>> sudo dpkg -i linux-image-<VERSION>-*_i386.deb
>>>> sudo dpkg -i linux-headers-<VERSION>-*_i386.deb
>>>>
>>>> There is not make install so I did not use this.
>>>> I thought it is not necessary because of the dpkg commands.
>>>> I will start the kernel steps again and I will use make install before
>>>> dpkg commands. Will it OK?
>>>>
>>>> Gábor
>>>>
>>>>
>>>>
>>>>
>>>> 2013/12/6 BOKOR Laszlo <goodzi at mcl.hu>
>>>>
>>>> Hi!
>>>>
>>>> Have you performed a make install after the kernel compilation?
>>>> It seems that the new kernel's header files are not in
>>>> their default place.
>>>>
>>>> Br,
>>>> goodzi
>>>>
>>>> --
>>>> László BOKOR
>>>> Budapest University of Technology and Economics (BME)
>>>> Department of Networked Systems and Services (HIT)
>>>> Tel: +36-1-463-2048, Fax: +36-1-463-3263
>>>> web: http://www.hit.bme.hu/~bokorl
>>>>
>>>> On Fri, 6 Dec 2013, Gábor Hegedüs wrote:
>>>>
>>>>
>>>> Yes I find it in:/usr/scr/linux-3.8.2-
>>>> mip6dng/include/uapi/linux/netconf.h
>>>>
>>>> What file can I overvrite to use this path?
>>>>
>>>> Thanks,
>>>> Gábor
>>>>
>>>>
>>>> 2013/12/6 BOKOR Laszlo <goodzi at mcl.hu>
>>>>
>>>> Hello!
>>>>
>>>> Can you locate the questionable netconf.h file on
>>>> your system?
>>>>
>>>> Br,
>>>> goodzi
>>>>
>>>> --
>>>> László BOKOR
>>>> Budapest University of Technology and Economics (BME)
>>>> Department of Networked Systems and Services (HIT)
>>>> Tel: +36-1-463-2048, Fax: +36-1-463-3263
>>>> web: http://www.hit.bme.hu/~bokorl
>>>>
>>>> On Fri, 6 Dec 2013, Gábor Hegedüs wrote:
>>>>
>>>> Hello Laci!
>>>> It is already installed.
>>>>
>>>> Gabor
>>>>
>>>>
>>>> 2013/12/6 BOKOR Laszlo <goodzi at mcl.hu>
>>>>
>>>> Dear Gabor,
>>>>
>>>> try install linux-libc-dev.
>>>>
>>>> Best regards,
>>>> goodzi
>>>>
>>>> --
>>>> László BOKOR
>>>> Budapest University of Technology and
>>>> Economics (BME)
>>>> Department of Networked Systems and
>>>> Services (HIT)
>>>> Tel: +36-1-463-2048, Fax: +36-1-463-3263
>>>> web: http://www.hit.bme.hu/~bokorl
>>>>
>>>> On Fri, 6 Dec 2013, Gábor Hegedüs wrote:
>>>>
>>>> Hi All!
>>>> I tryed ti install mip6d-ng with
>>>> mak all install command after ./configuration.
>>>> I get som errors. I linked the
>>>> screenshots.
>>>>
>>>> The end od the ./configure command'
>>>> output:
>>>> https://dl.dropboxusercontent.
>>>> com/u/91011488/NG_configure.png
>>>> Make all install outputs:
>>>> 1: https://dl.dropboxusercontent.
>>>> com/u/91011488/NG_makeall1.png
>>>> 2: https://dl.
>>>> dropboxusercontent.com/u/91011488/NG_makeall2.png
>>>> 3: https://dl.
>>>> dropboxusercontent.com/u/91011488/NG_makeall3.png
>>>> 4: https://dl.
>>>> dropboxusercontent.com/u/91011488/NG_makeall4.png
>>>>
>>>> I did not find netconf.h.
>>>>
>>>> What could be the problem?
>>>>
>>>>
>>>> Thanks,
>>>> Gábor
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>
>> _______________________________________________
>> Support mailing list
>> Support at mip6d-ng.net
>> http://mcl.hu/mailman/listinfo/support
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mcl.hu/pipermail/support/attachments/20131208/6827ddae/attachment.html>
More information about the Support
mailing list