[MIP6D-NG Support] mip6d-ng make all install errors
BOKOR Laszlo
goodzi at mcl.hu
Fri Dec 6 14:04:19 CET 2013
Hi!
Where have you performed the kernel setup in this workflow?
Br,
goodzi
ps.: please choose reply all in order to always keep the list cc-d.
--
László BOKOR
Budapest University of Technology and Economics (BME)
Department of Networked Systems and Services (HIT)
Tel: +36-1-463-2048, Fax: +36-1-463-3263
web: http://www.hit.bme.hu/~bokorl
On Fri, 6 Dec 2013, Gábor Hegedüs wrote:
> Hello!
> I did not use make install.
> I followed the readme files and 5th and 6th
> steps are:
>
> 5. Compiling kernel
> -------------------
> cd linux-stable
> make clean
> make -j `getconf _NPROCESSORS_ONLN` deb-pkg LOCALVERSION=-mip6dng
>
> 6. Installing the kernel
> ------------------------
> sudo dpkg -i linux-image-<VERSION>-*_i386.deb
> sudo dpkg -i linux-headers-<VERSION>-*_i386.deb
>
> There is not make install so I did not use this.
> I thought it is not necessary because of the dpkg commands.
> I will start the kernel steps again and I will use make install before
> dpkg commands. Will it OK?
>
> Gábor
>
>
>
>
> 2013/12/6 BOKOR Laszlo <goodzi at mcl.hu>
>
> Hi!
>
> Have you performed a make install after the kernel compilation? It seems that the new kernel's header files are not in
> their default place.
>
> Br,
> goodzi
>
> --
> László BOKOR
> Budapest University of Technology and Economics (BME)
> Department of Networked Systems and Services (HIT)
> Tel: +36-1-463-2048, Fax: +36-1-463-3263
> web: http://www.hit.bme.hu/~bokorl
>
> On Fri, 6 Dec 2013, Gábor Hegedüs wrote:
>
>
> Yes I find it in:/usr/scr/linux-3.8.2-mip6dng/include/uapi/linux/netconf.h
>
> What file can I overvrite to use this path?
>
> Thanks,
> Gábor
>
>
> 2013/12/6 BOKOR Laszlo <goodzi at mcl.hu>
>
> Hello!
>
> Can you locate the questionable netconf.h file on your system?
>
> Br,
> goodzi
>
> --
> László BOKOR
> Budapest University of Technology and Economics (BME)
> Department of Networked Systems and Services (HIT)
> Tel: +36-1-463-2048, Fax: +36-1-463-3263
> web: http://www.hit.bme.hu/~bokorl
>
> On Fri, 6 Dec 2013, Gábor Hegedüs wrote:
>
> Hello Laci!
> It is already installed.
>
> Gabor
>
>
> 2013/12/6 BOKOR Laszlo <goodzi at mcl.hu>
>
> Dear Gabor,
>
> try install linux-libc-dev.
>
> Best regards,
> goodzi
>
> --
> László BOKOR
> Budapest University of Technology and Economics (BME)
> Department of Networked Systems and Services (HIT)
> Tel: +36-1-463-2048, Fax: +36-1-463-3263
> web: http://www.hit.bme.hu/~bokorl
>
> On Fri, 6 Dec 2013, Gábor Hegedüs wrote:
>
> Hi All!
> I tryed ti install mip6d-ng with mak all install command after ./configuration.
> I get som errors. I linked the screenshots.
>
> The end od the ./configure command' output:
> https://dl.dropboxusercontent.com/u/91011488/NG_configure.png
> Make all install outputs:
> 1: https://dl.dropboxusercontent.com/u/91011488/NG_makeall1.png
> 2: https://dl.dropboxusercontent.com/u/91011488/NG_makeall2.png
> 3: https://dl.dropboxusercontent.com/u/91011488/NG_makeall3.png
> 4: https://dl.dropboxusercontent.com/u/91011488/NG_makeall4.png
>
> I did not find netconf.h.
>
> What could be the problem?
>
>
> Thanks,
> Gábor
>
>
>
>
>
>
>
>
More information about the Support
mailing list